NETGEAR EAX14 User Manual

Deny access to a computer or WiFi device.....................................39
Set up an access schedule.................................................................40
Change the extender’s device name...............................................41
Set up the extender to use a static IP address................................42
Adjust the WiFi coverage..................................................................43
Enable FastLane technology.............................................................44
Configure a router with advanced MAC settings to work with your
extender...............................................................................................45
Chapter 4 Maintain and monitor the extender
Change the extender login user name and password..................48
Turn password protection off and on..............................................49
Recover a forgotten user name or password..................................50
Automatically adjust for daylight saving time.................................51
Manually set the extender clock.......................................................52
Set your time zone..............................................................................53
Back up and manage the extender configuration..........................54
Back up the configuration settings...................................................54
Restore the configuration settings...................................................55
Return the extender to its factory default settings.........................56
Use the Reset button.....................................................................56
Log in and reset the extender to factory settings......................57
Update the extender firmware..........................................................58
Check for new firmware and update the extender....................58
Manually upload firmware to the extender................................59
Restart the extender from the extender web interface..................60
Turn the LEDs On or Off....................................................................61
Chapter 5 FAQs and troubleshooting
FAQs.....................................................................................................64
Find the Extender’s IP address..........................................................65
Cannot Connect to the Extender......................................................66
Cannot Join a WiFi Network and Receive an Error Message.......66
Cannot access mywifiext.net.............................................................67
Cannot connect to extender using the Nighthawk app................68
Chapter 6 Supplemental Information
Factory Default Settings.....................................................................70
Technical and Environmental Specifications..................................71
4
AX1800 4-Stream WiFi 6 Mesh Extender

NETGEAR EAX14 Specifications

Operating Environment

operating temperature	32° to 104°F (0° to 40°C)
operating humidity	90% maximum relative humidity, noncondensing

Ports & interfaces

ethernet port speed	10/100/1000 Mbps
wireless standards	802.11a/b/g/n/ac/ax and 802.11k

Weight and Dimensions

dimensions	5.9 x 2.7 x 2.1 in (149.86 x 68.58 x 53.34 mm)
weight	0.49 lb (222 g)