EasyManuals Logo
Home>NETGEAR>Switch>GS110EMX

NETGEAR GS110EMX User Manual

NETGEAR GS110EMX
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
6.
Enter the fixed (static) IP address that you want to assign to the switch and the
associated subnet mask and gateway IP address.
You can also either leave the address in the IP Address field as it is (with the IP
address that was issued by the DHCP server) or change the last three digits of the
IP address to an unused IP address.
7.
Write down the complete fixed IP address.
You can bookmark it later.
8.
Click the Apply button.
Your settings are saved. Your switch web session is disconnected when you change
the IP address.
9.
If the login page does not display, in the address field of your web browser, enter
the new IP address of the switch.
The login page displays.
10.
For easy access to the local browser interface, bookmark the page on your computer.
Set Up a Fixed IP Address for the Switch by Connecting Directly to the
Switch Off-Network In the unlikely situation that the switch is not connected to a
network, or for some reason you cannot connect to the switch over a network connection,
you can change the IP address of the switch by using an Ethernet cable and making a
direct connection to the switch.
To disable the DHCP client of the switch and change the IP address of the switch
to a fixed IP address by using a direct connection:
1.
Connect an Ethernet cable from your computer to an Ethernet port on the switch.
2.
Change the IP address of your computer to be in the same subnet as the default IP
address of the switch.
The default IP address of the switch is 192.168.0.239. This means that you must
change the IP address of the computer to be on the same subnet as the default IP
address of the switch (192.168.0.x).
The method to change the IP address on your computer depends on the operating
system of your computer.
3.
Open a web browser from a computer that is connected to the switch directly through
an Ethernet cable.
4.
Enter 192.168.0.239 as the IP address of the switch.
The login page displays.
5. Enter the switch password.
User Manual22Install and Access the Switch in
Your Network
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX

Table of Contents

Other manuals for NETGEAR GS110EMX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR GS110EMX and is the answer not in the manual?

NETGEAR GS110EMX Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3
Quality of Service (QoS) supportYes
Number of VLANs64
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.3az, IEEE 802.3x
Virtual LAN featuresVoice VLAN, Tagged VLAN, Port-based VLAN
Cable types supportedCat5, Cat5e, Cat6, Cat6a, Cat7
DHCP featuresDHCP client
Queue scheduling algorithmsWeighted Round Robin (WRR)
Noise level0 dB
Power connectorDC-in jack
Installed SFP modules quantity0
Gigabit Ethernet (copper) ports quantity8
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity10
Jumbo frames10240
Forwarding rate41.664 Mpps
Latency (1 Gbps)4 µs
Latency (10 Gbps)3 µs
MAC address table16000 entries
Packet buffer memory0.128 MB
Latency (10-100 Mbps)7 µs
Number of multicast groups filtered128
SafetyUL/cUL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07, EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013, IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013, AS/NZS 60950.1:2015
Stackable-
Certification47 CFR FCC Part 15, SubpartB, Class B ICES-003:2016 Issue 6, Class B ANSI C63.4:2014 N 55032:2012 +AC:2013 / CISPR 32:2012 / AS/NZS CISPR 32:2013, Class B EN 55032:2015 +AC:2016 / CISPR 32:2015 +COR1:2016 / AS/NZS CISPR 32:2015, Class B EN 61000-3-2:2014 EN 61000-3-3:2013 EN 55024:2010 +A1:2015
Product colorBlack
LED indicatorsLink, Power, Speed
Number of fans0 fan(s)
Housing materialMetal
Electromagnetic compatibilityClass B
Output current2.5 A
Output voltage12 V
Power consumption (max)15.6 W
Power consumption (typical)6.6 W
Heat dissipation53.35 BTU/h
Operating altitude0 - 3000 m
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)0 - 95 %
Operating relative humidity (H-H)0 - 90 %
Package depth270 mm
Package width164 mm
Package height85 mm
Package weight1340 g
Shipping (inner) case width490 mm
Shipping (inner) case height339 mm
Shipping (inner) case length391 mm
Shipping (inner) case net weight15460 g
Number of layers per pallet (air)4 pc(s)
Number of cartons per pallet layer6 pc(s)
Quantity per shipping (inner) case10 pc(s)
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth102 mm
Width236 mm
Height27 mm
Weight750 g

Related product manuals