To Next Page

To Previous Page

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

10-6 Configuring Filters

Configuring a Filter Rule

You can configure two types of filter rules. Some of the parameters differ depending on the type

of rule. When you first enter the filter rule menu, Menu 21.1.1 - TCP/IP Filter Rule is displayed.

If you want to configure another type of filter rule, select the appropriate type by pressing the

space bar under the Filter Type field and then pressing [Enter] to display the menu for the filter

rule you want to enter.

TCP/IP Filter Rule

This section provides information about how to configure a TCP/IP filter rule for your router.

The fields in the menu are given in Table 10-4. When you have completed Menu 21.1.1 - TCP/IP

Filter Rule, press [Enter] at the Press ENTER to Confirm...prompt to confirm your selections.

You can press [Esc] at any time to cancel your selections. The data you entered on

Menu 21.1.1 - TCP/IP Filter Rule is displayed on Menu 21.1 - Filter Rules Summary.

Table 10-4 lists and describes the TCP/IP Filter Rule menu fields.

NETGEAR RT311 User Manual

Other manuals for NETGEAR RT311