Supplied components
Room sensorParticle filterOutside sensor
LEK
LEK
O-ringsSafety valve
(0.3 MPa) (3 bar)
Level vessel
LEK
Conex connectorsAluminium tape
5,8kW
LEK
2 x (ø28 x G25)
3 x (ø22 x G20)
Insulation tape
12 kW
5 x (ø28 x G25)
Tubes for sensorsTemperature sensor
Location
The kit of supplied items is placed in packaging on top
of the heat pump.
Removing the covers
Front cover
1
2
LEK
LEK
1.
Remove the screws from the lower edge of the front
cover.
2.
Lift the cover out at the bottom edge and up.
Side covers
LEK
LEK
LEK
The side covers can be removed to facilitate the installa-
tion.
1.
Remove the screws from the upper and lower edges.
2.
Twist the cover slightly outward.
3.
Move the cover backwards and slightly to the side.
4.
Pull the cover to one side.
5.
Pull the cover forwards.
NIBE™ F1145Chapter 2 | Delivery and handling6
To Next Page
Loading...
Need help?
General
