INSTALLATION
4
4 Installation
WARNING
Dangerofinjuryfromweatherinuences.
The skin may suffer frostbite or burns.
– Wear personal protective equipment.
WARNING
Risk of injury from incorrectly dimensioned mountings.
Crushing and battering possible.
– Use only fastening materials that are suitable for
the dimensions of the mountings.
– The counter-mountings (provided by customer)
must be designed at least for the forces for which
the device has been designed.
WARNING
Danger of injury from loss of support and holding function.
Crushing and battering possible.
– Pay attention to static loads.
WARNING
Damage to the device from installation outside or in damp
rooms.
– The clamping units of the connecting cable must
be designed with the required IP protection
class.
– Iflaidoutdoors,cablesmustbettedwithadrip
loop.
WARNING
Damage to the device from radial and/or torsional forces.
– The device must be designed in such a way that
no radial and/or torsional forces can act on the
device.
WARNING
Damage to the device from blocking of the piston rod.
– The linear pathway of the piston must be freely
moveable at all times.
– The pivoting range of the device must be kept
clear.
WARNING
Damage to the device from loss of support and holding
function.
– Pay attention to static loads.
10 – ENGLISH
EN
To Next Page
Loading...
Need help?
General
