Nikon Coolpix S50 User Manual

20
Basic Photography and Playback: Auto Mode
Basic Photography and Playback: Auto Mode
Step 1 Turn the Camera On and Select L (Auto) Mode
This section describes how to take pictures in L (auto) mode, an automatic,
“point-and-shoot” mode recommended for first-time users of digital cam-
eras.
1 Press the power switch to turn on the
camera.
The power-on lamp will light and the monitor will
turn on.
Proceed to step 4 when M is displayed.
2 Press C.
3 Use the rotary multi selector to choose
L and press d.
The camera enters L (auto) mode.
4 Check the battery level and number of
exposures remaining.
Battery level
Number of exposures remaining
The number of pictures that can be stored depends on the capacity of the memory
or memory card and image mode setting.
Monitor Description
NO INDICATOR Battery fully charged.
w
Battery low; charge or replace
the battery.
K
Warning!
Battery
exhausted.
Battery exhausted. Recharge or
replace with a fully charged
battery.
Shooting
6
M
M
w
L
W
w
W
6
Battery level indicator
Number of exposures
remaining

Nikon Coolpix S50 Specifications

General

Megapixel	7.2 MP
Sensor type	CCD
Image sensor size	1/2.5 \
Optical zoom	3 x
Focal length range	6.3 - 18.9 mm
Interface	USB
Digital SLR	No
Built-in flash	Yes
Focal length (35mm film equivalent)	38 - 114 mm
ISO sensitivity	100, 200, 400, 800, 1600, Auto
Flash range (tele)	0.3 - 4 m
Flash range (wide)	0.3 - 6 m
Internal memory	13 MB
Compatible memory cards	sd
Motion JPEG frame rate	30 fps
Maximum video resolution	640 x 480 pixels
Display diagonal	3 \
Product color	Red
Battery life (CIPA standard)	130 shots

Weight and Dimensions

Depth	21 mm
Width	92.5 mm
Height	59 mm
Weight	125 g

Summary

Introduction and Safety

Safety Precautions for Camera Use

Read all safety instructions carefully before using the camera to prevent injury or damage.

Getting Started with Your Camera

Battery Handling and Insertion

Instructions for charging the camera battery and inserting it correctly into the battery compartment.

Memory Card Management

Guide for inserting, removing, and formatting memory cards for picture storage.

Initial Camera Setup: Language, Date, and Time

Steps to set the camera's language, date, time, and time zone for proper operation.

Core Photography Functions

Powering On and Using Auto Mode

How to turn on the camera and select Auto mode for simple shooting.

Framing, Focusing, and Shooting Pictures

Instructions on using zoom, focusing, and pressing the shutter button to capture images.

Using Flash and Self-Timer

Guidance on selecting flash modes and using the self-timer for portraits and shake reduction.