42
Anti-shake Mode
Anti-shake Mode
Shooting in Anti-shake Mode
In anti-shake mode, vibration reduction (c 114) and BSS (c 95) are
enabled. In addition, ISO sensitivity is automatically raised to 1600 depending
upon the brightness of the subject and shutter speed is faster than with L
(auto) mode, under the same lighting conditions, to reduce blurring caused
by camera shake or subject movement. The flash is disabled. This mode is
most effective when shooting under natural light. Combine it with the tele-
photo zoom when you are forced to shoot from a distance in order to cap-
ture a fleeting expression on a portrait subject or to photograph an animal
without frightening it off.
1 Press F.
The camera enters anti-shake mode. Press again to
return to the shooting mode selected in the shooting-
mode selection menu.
2 Frame the subject and take the
picture.
While the shutter-release button is held
down, camera takes shots to a maxi-
mum of ten, they are compared and
sharpest picture (picture with highest
level of detail) is saved.
j Notes on Anti-shake Mode
• Shutter speed is limited to a certain value for dark subjects.
• Use of the high-sensitivity shooting mode (c 33) is recommended for shooting subjects
under low lighting.
• Pictures taken in this mode may become somewhat grainy.
k Anti-shake Mode Settings
Vibration reduction (c 114) and BSS (c 95) are enabled; the flash is disabled. The following
items in the shooting menu are locked and cannot be adjusted: [White balance], [Auto]; [Con-
tinuous], [Single]; [Color options], [Standard color]; [Focus area], [Center]. Macro close-up
mode and exposure compensation are available; the self-timer is not available.
l Image Mode in Anti-shake Mode
When m is pressed in anti-shake mode, a menu is displayed to enable adjustment of image
mode (c 89) settings. Changes made to these settings apply to all shooting modes.
M
W
B
W
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
