168
Menu Guide—The Setup Menu
Image Rotation
By default, the D70S records camera orientation
with each photograph taken. This allows “tall”
(portrait) orientation photographs to be displayed
in the correct orientation when played back on
the camera or viewed using Nikon Capture 4
version 4.2 or later (available separately) or Pic-
tureProject. If desired, this feature can be turned
off while taking photographs with the lens pointed up or down, when the
camera may fail to record the correct orientation. Highlight Image rotation
in the setup menu ( 155) and press the multi selector to the right. Press
the multi selector up or down to highlight the desired option, then press the
multi selector to the right.
Option Description
Automatic
(default)
Off
Camera orientation is not recorded. Nikon Capture 4 version 4.2 or
later and PictureProject display all photographs in landscape (wide)
orientation, and camera rotation icon in Nikon Capture 4 Camera
Control shows camera in horizontal (landscape) orientation. Choose
this option when taking photographs with lens pointing up or lens
pointing down.
Camera records whether shots are in landscape (wide) orientation, por-
trait (tall) orientation with the camera rotated 90 ° clockwise, or portrait
(tall) orientation with the camera rotated 90 ° counter-clockwise.
*
* In continuous mode ( 62), orientation recorded for fi rst shot applies to all images
in same burst, even if camera orientation is changed during shooting.
Landscape (wide)
orientation
Camera rotated 90 °
counter-clockwise
Camera rotated 90 °
clockwise
Rotate Tall ( 126)
“Tall” orientation photographs taken with Automatic selected for image rotation will
only be displayed in tall orientation in the camera monitor if Yes is selected for Rotate
tall.
To Next Page
Loading...
Need help?
General
