nilan Compact P Software Instructions

Turning the unit on
When power is on, light will appear in the control panel, but all functions will be off. This is to prevent
errors, e.g. no water supply to the hot water tank, when the unit starts producing hot water.
The unit's functions are activated in the service menu under General settings.
ATTENTION
Before working on electrical installations, the power supply must be turned off.
ATTENTION
It is important that the ventilation section is not turned off for lengthy periods after duct
installation, as this could cause condensation problems in the unit.
General settings
Service
↳
Unit start/stop Settings:
Standard setting:
Description:
On / Off
Off
The unit is turned off at the factory to prevent errors
occurring when power is connected.
The installer starts the unit here.
The installer can also turn off the entire unit if
performing service inspection.
12

nilan Compact P Specifications

General

Brand	nilan
Model	Compact P
Category	Heat Pump
Language	English