DHW compressor settings
C
ompressor settings for the domestic hot water production can be read off as information for the
installer, and can only be set as an administrator.
Domestic hot water production
DHW hot water tank
↳
Compressor settings hot water
↳
Time between compressor starts
(min.)
Standard setting: 10 minutes
↳
Minimum off time compressor (min.) Standard setting: 5 minutes
DHW reading of temperatures
H
ere the temperature sensors in the hot water tank can be read of.
Domestic hot water production
DHW hot water tank
↳
Temperature overview
↳
T11 top temperature hot water
tank (°C)
Description: Shows the temperature at the top of the hot water
tank.
↳
Temperature sensor status Description: Indicates whether the sensor is in working order (OK /
Error / Absent).
↳
Offset (°C) Description: It is possible to adjust the sensor if it shows the wrong
temperature.
↳
T12 bottom temperature hot water
tank (°C)
Description: Shows the temperature at the bottom of the hot water
tank.
32
To Next Page
Loading...
Need help?
General
