Nilfisk-Advance SC2000 Service Manual

Scrub System, Disc 71Service Manual – SC2000
Brush Motor Disassembly/Assembly
Disassembly
1. Remove the brush deck.
2. At the workbench, remove the screw (A) (Figure
11) of the brush motor.
3. Use a puller to remove the brush hub (B).
4. Remove the screws (C).
5. Remove the brush motor (D).
6. Recover the key (E).
Assembly
7. Assemble the components in the reverse order of
disassembly.
Note: For further information on deck
components see the Spare Parts
List.
Figure 11
A
E
B
C
D

Nilfisk-Advance SC2000 Specifications

General

Brand	Nilfisk-Advance
Model	SC2000
Category	Floor Machine
Language	English