Recovery System 54Service Manual – SC3000
Recovery System
Functional Description
The water recovery system removes the dirty water from the oor and pipes it to a recovery tank. When the
machine is running, the dirty water on the oor is collected by the squeegee blades and collected through the
slots in the same, piped through the vacuum hose and into the tank by the airow created by Vacuum system
motor (M2). The dirty water is piped into the recovery tank, while the airow continues to the vacuum fan.
A tank with a screen collects the largest debris going through the recovery tank hose.
The automatic oat in the vacuum screen stops Vacuum system motor (M2) from collecting any liquids.
When the automatic oat closes and shuts down the vacuum system, the vacuum system motor noise will in-
crease and the oor will not be dried.
When the recovery tank is full it can be emptied through the drain hose.
Wiring Diagram
Function electric board (EB1)
P100558
To Next Page
Loading...
Need help?
General
