The countdown timer is running.
The stopwatch is running.
The GPRS connection mode
Always online
is selected and the
EGPRS service is available. The indicator for GPRS and EGPRS is the
same.
An (E)GPRS connection is established.
The (E)GPRS connection is suspended (on hold), for example, if
there is an active call during an (E)GPRS dial-up connection.
When the infrared connection is activated, the indicator is
shown continuously.
or If you have two phone lines, the indicator displays the
selected phone lines.
All incoming calls are diverted to another number.
The loudspeaker is activated, or the music stand is connected to
the phone.
Calls are limited to a closed user group.
, , A headset, handsfree, or loopset is connected to the
phone.
The timed profile is selected.
Access codes
• Security code: This code is supplied with the phone. The security
code protects your phone against unauthorized use. The pre-set
code is 12345.
Change the code, and keep the new code confidential and in a
safe place separate from your phone. You can change the code
and set the phone to request the code. SeeSecurity settings{No
generated text before found for '#on_page'}75.
• PIN code: The personal identification number (PIN) code may be
supplied with the SIM card. It protects your SIM card against
unauthorized use. Set the phone to request the PIN code each
time the phone is switched on. SeeSecurity settings{No generated
text before found for '#on_page'}75.
Getting started
16
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To Next Page
Loading...
Need help?
General
