• Very short names are not accepted. Use long names and avoid
similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialling in all circumstances.
Adding a voice tag
You can record a voice tag for any contact in the phone memory.
Save or copy into the phone memory the contacts for which you
want a voice tag.
1. In standby mode, press
, and scroll to the contact to which
you want to add a voice tag.
2. Press Details, scroll to the desired phone number, press Options,
and select
Add voice tag
.
3. Press Start, and speak clearly the words for the voice tag. After
recording, the phone plays the recorded voice tag.
appears after the phone number with a voice tag in
Contacts
.
Making calls with voice tags
If the phone has an application running that is sending or receiving
data using the (E)GPRS connection, you must end the application
before using voice tags.
In standby mode, press and hold the volume-down key, or press and
hold the selection key
. Speak the voice tag clearly. The phone
plays the voice tag if it is recognized, and dials the phone number of
the voice tag after 1.5 seconds.
Other functions
Press Menu, and select
Contacts
.
Select from the following options:
Contacts
66
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To Next Page
Loading...
Need help?
General
