Nokia G-2426G-A User Manual

Table 7-35 NTP parameters
Field Description
Enable NTP Service Select this checkbox to enable the NTP service.
Current Time Enter the current local date and time.
Primary Time Server Select a time server from the list or choose Customer setting and enter the address of the time
server.
Secondary Time Server Select a time server from the list or choose Customer setting and enter the address of the time
server.
Third Time Server Select a time server from the list or choose Customer setting and enter the address of the time
server.
Interval Time Enter the interval at which to get the time from the time server, in seconds.
Time Zone Select the local time zone from the list.
3
Click Save.
END OF STEPS
7.41 Configuring USB
You can connect USB storage devices and USB printers to the USB ports of the device. The USB
menu enables you to configure FTP and SFTP for your USB storage devices.
The USB connected devices are shown in overview table on the bottom of the USB window.
1
Click Application→USB from the left pane in the GPON Home Gateway page. The USB page
displays.
Configure a G-2426G-A indoor ONT
Configuring the Application
Configuring USB
7368 ISAM ONT
Draft Draft
September 2020
Issue 1 143
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA

Nokia G-2426G-A Specifications

General

Device Type	GPON ONT
Wi-Fi Frequency Bands	2.4 GHz, 5 GHz
Humidity	5% to 95% (non-condensing)
Wi-Fi Standards	IEEE 802.11 b/g/n
Power Supply	12V DC, 1.5A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to +70°C
Upstream Speed	1.25 Gbps