Nokia G-2426G-A User Manual

4
Select the test type: ping, traceroute, or both.
5
Enter the number of ping attempts to perform (1 - 1000); the default is 4.
6
Enter a ping packet length (64-1024); the default is 64.
7
Enter the maximum number of trace hops (1-255); the default is 30.
8
Click Start Test. The results will be displayed at the bottom of the page.
9
Click Cancel to cancel the test.
END OF STEPS
7.57 Viewing log files
1
Click Maintenance→Log from the left pane in the GPON Home Gateway page. The Log page
displays.
Configure a G-2426G-A indoor ONT
Maintenance
Viewing log files
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
164 Issue 1

Nokia G-2426G-A Specifications

General

Device Type	GPON ONT
Wi-Fi Frequency Bands	2.4 GHz, 5 GHz
Humidity	5% to 95% (non-condensing)
Wi-Fi Standards	IEEE 802.11 b/g/n
Power Supply	12V DC, 1.5A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to +70°C
Upstream Speed	1.25 Gbps