Nokia G-2426G-A User Manual

Table 7-5 Home Networking parameters
Field Description
Local Interface
Ethernet Table displays the number of Ethernet connections and their settings
Wireless Table displays the number of wireless connections and their settings (2.4GHz and 5GHz)
Wireless Settings (2.4GHz and 5GHz)
Network Name Name of the wireless network
Access Point Hexadecimal address of the wireless access point
Local Devices
Table entry Each entry indicates the status (active or inactive), connection type, device name, IP address, hardware
address, IP address allocation, lease remaining, and last active time of each connected local device.
Routing Domain Details
Table entry Shows the domain name, WAN name, number of IPs, IP range, and LAN list.
You can:
• Click Delete to delete a particular local device connection.
• Click Refresh to display up-to-date information.
END OF STEPS
7.11 Viewing Optics module status
1
Click Status→Optics Module Status from the left pane in the GPON Home Gateway page.
The Optics Module Status page displays the following information:
Configure a G-2426G-A indoor ONT
Viewing device information and connection status
Viewing Optics module status
7368 ISAM ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-XXXXX-AAAA-TCZZA
September 2020
82 Issue 1

Nokia G-2426G-A Specifications

General

Device Type	GPON ONT
Wi-Fi Frequency Bands	2.4 GHz, 5 GHz
Humidity	5% to 95% (non-condensing)
Wi-Fi Standards	IEEE 802.11 b/g/n
Power Supply	12V DC, 1.5A
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to +70°C
Upstream Speed	1.25 Gbps