Connectivity
93
To connect to a server and receive configuration settings
for your device, scroll to a profile, and select Options >
Start configuration.
To allow or deny receiving of configuration settings from
service providers, select Options > Enable config. or
Disable config..
Server profile settings
Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
configuration server.
Server password—Enter a password to identify your device
to the server.
Session mode—Select the connection type that is used to
connect to the server: Bluetooth or Internet.
Access point—Select an access point to be used when
connecting to the server.
Host address—Enter the URL address of the server.
Port—Enter the port number of the server.
User name and Password—Enter your user name and
password.
Allow configuration—To receive configuration settings
from the server, select Yes.
Auto-accept all reqs.—If you want your device to ask for
confirmation before accepting a configuration from the
server, select No.
Network authentic.—Select if network authentication is
used.
Modem
Press , and select Connect. > Modem. To connect your
device to a compatible PC through infrared, to use it as a
modem, press . For how to connect the devices, see
‘Infrared connection’, p. 87
9247473_N93_UG_en_hk.book Page 93 Tuesday, November 14, 2006 5:51 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
