EasyManuals Logo
Home>Notifier>Fire Alarms>NFS-640

Notifier NFS-640 Installation Manual

Notifier NFS-640
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Addressable Modules System Overview
NFS-640 Installation Manual P/N 51332:B1 12/01/2003 19
FST-851. Intelligent thermistor sensing circuit for fast response. Designed to provide open area
protection with 50 foot spacing capability. A fixed temperature sensor with 135°F fixed
temperature alarm. FlashScan capable. The FST-851R incorporates a thermal rate of rise of 15°F
(9.4°C). FlashScan capable. The FST-851H is a high temperature sensor with 190°F fixed
temperature alarm.
FSI-751. Analog, addressable, low profile intelligent smoke detector that incorporates an
ionization sensing chamber. Designed to provide open area protection.
FSP-751. Same as FSI-751, but uses a photoelectric sensing chamber. The FSP-751T adds
thermal sensors that will alarm at a fixed temperature of 135°F (57°C). Designed to provide open
area protection.
FST-751. Intelligent thermistor sensing circuit for fast response. Designed to provide open area
protection with 50 foot (15.24 m) spacing capability. The FST-751R incorporates a thermal rate of
rise of 15°F (9.4°C).
FSD-751P. Photoelectric Duct Detector. The FSD-751RP includes an alarm relay. The FSD-
751PL and FSD-751RPL are low-flow detectors.
HPX-751 (HARSH™). A special smoke detector that provides early warning smoke detection in
hostile environments where traditional smoke detectors are not practical. CLIP mode only.
FSH-751 (HARSH™). A special smoke detector that provides early warning smoke detection in
hostile environments where traditional smoke detectors are not practical. FlashScan capable.
IPX-751. A microprocessor-based intelligent smoke detector that uses a combination of
photoelectric, ionization, and thermal sensing technologies. CLIP mode only.
FAPT-751Acclimate Plus™ is a Combination Photoelectric/Heat Detector. This intelligent,
addressable, multi-sensing, low-profile detector can automatically adjust its sensitivity. It uses a
combination of photoelectric and thermal sensing technologies that are designed to increase
immunity to false alarms.
LPX-751. Early detection laser detector, similar to the FSL-751 VIEW®, but limited to CLIP
mode operation only.
FSL-751 VIEW® Low Profile Laser Detector. An advanced intelligent photoelectric detector
that uses a laser diode, special optics, and signal processing to obtain extremely high sensitivity.
FlashScan capable.
Bases
Several bases, to which the detectors are affixed, are available:
B710LP. Standard U.S. Low-Profile base
B501. Standard European flangeless base
B501BH, B501BHT. Sounder base, includes B501 Sounder base with temporal sounder
B224RB. Low Profile Intelligent relay base
B224BI. Low Profile Intelligent isolator base
B710HD. HARSH™ base.
Accessories
RA400Z. A Remote Single LED Annunciator that can be wired directly off of an addressable
detector for annunciation of that detector's alarm status.
2.6 Addressable Modules
Control Modules and Monitor Modules provide an interface between the control panel and
conventional notification and initiating devices. Each module can be set to respond to an address

Table of Contents

Other manuals for Notifier NFS-640

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Notifier NFS-640 and is the answer not in the manual?

Notifier NFS-640 Specifications

General IconGeneral
BrandNotifier
ModelNFS-640
CategoryFire Alarms
LanguageEnglish

Related product manuals