Introduction to the NVIDIA DGX A100 System
NVIDIA DGX A100 DU-09821-001 _v01|7
1.1.6. Environmental Specifications
Here are the environmental specifications for your DGX A100 system.
Feature Specification
Operating Temperature 5° C to 30° C (41° F to 86° F)
Relative Humidity 20% to 80% non-condensing
Airflow 840 CFM @ 80% fan PWM
Heat Output 22,179 BTU/hr
1.1.7. Front Panel Connections and Controls
This section provides information about the front panel, connections, and controls of the DGX
A100 system.
1.1.7.1. With a Bezel
Here is an image of the DGX A100 system with a bezel.
Control Description
Power Button
Press to turn the DGX A100 system On or Off.
‣
Green flashing (1 Hz): Standby (BMC booted)
‣
Green flashing (4 Hz): POST in progress
‣
Green solid On: Power On
ID Button
Press to cause the button blue LED to turn On
or blink (configurable through the BMC) as an
identifier during servicing.
Also causes an LED on the back of the unit to
flash as an identifier during servicing.
To Next Page
Need help?
General
