B710, B720, B730 User’s Guide > 16
AirPrint
®
AirPrint is a wireless technology that allows you to print from
your iPhone
®
, iPod touch
®
, iPad
®
, or other iOS device without
installing a printer driver. AirPrint can be used with Apple
®
devices running iOS 4.2 or later.
Your OKI printer comes with AirPrint configured ON and ready to
work once it is connected to your network.
Setup Requirements
To use AirPrint from your mobile device, you must be connected
using Wi-Fi to the network your printer is connected to. Your
printer can be connected to the wireless access point using either
a wireless or wired connection.
Printing from your Apple iOS Device
Most applications on your iOS device that allow printing will allow
you to use AirPrint. For example, if you would like to print the
currently displayed web page using Safari, press the Action
button and then the Print button. You will see the Printer Options
dialog. Press the Printer button to select the desired printer from
the list of AirPrint printers that were automatically discovered by
your device. Then press the Print button to print the desired
page.
Depending on features supported by the selected printer, you
may also see options for selecting the number of copies or
double-sided printing.
Security
If you attempt to print a page and you receive a notification that
says “Password required for…”, this means your network
administrator has configured the printer to require a User ID and
password in order to use this printer. Enter your User ID and
password and press OK to print your document. Both User ID and
password are case sensitive. After you have entered a correct
User ID and password, your device will remember them so you
will not have to enter them again for additional prints.
To Next Page
Need help?
General
