Oki B710 User Manual

B710, B720, B730 User’s Guide > 54
Admin\ Network Menu
Default settings are in bold face type.
Submenus Available
Settings
TCP/IP Enable , Disable
IPv6
Enable , Disable
IPSec Enable,
Disable
802.1X Enable, Disable
Netware Enable, Disable
Ethertalk Enable , Disable
IP Address Set
Automatic , Manual
IP Address (user-specified)
Subnet Mask (user-specified)
Gateway Address (user-specified)
Factory Default Execute
DNS Enable,
Disable
WINS Enable , Disable
Web
Enable , Disable
SNMP Disable,
SNMP v1/v2 , SNMP v1/v2/v3, SNMP v3
FTP Print Enable,
Disable
Hub Link Setting Auto Negotiate , 10 Base-T Full, 10 Base-T Half,
100 Base-T Full, 100 Base-T Half, 1000 Base-T Full,
1000 Base-T Half
PS Protocol ASCII,
RAW
HTTP Port 1 - 9999, Default is 80
Netware Frame Auto-Sense, 802.3, Ethernet II, 802.2 SNAP, 802.2

Oki B710 Specifications

General

Brand	Oki
Model	B710
Category	All in One Printer
Language	English