B710, B720, B730 User’s Guide > 81
Job Offset
Note
Requires the optional Offset Catch Tray.
This feature places sheets in alternate positions to separate one
print job from another.After the final sheet of a print job is
printed, the next job is offset (shifted a bit) to keep it separate
from the previous print job.
The Offset Catch Tray must be installed to use this feature. Once
installed, this feature is enabled by default.
Print Quality
You can adjust quality settings, including:
• Resolution: Select 600 dpi for normal printing or 1200 dpi for
high quality mode.
• Toner Save: This prints everything with less print density.
Font Substitution
This feature allows you to substitute TrueType fonts with printer
fonts. You can also set the TrueType font output type.
To Next Page
Loading...
Need help?
General
