111 – C910 Appendix B – Menu system
Menus example 1 – Tray 1 transparencies
To print on transparencies (accommodated in Tray1):
1. Ensure that the display panel indicates that the printer is
ready to print.
2. Enter menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly until the
Menus menu is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly
until Tray Configuration is highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly
until Tray1 Config is highlighted.
7. Press the Enter button to select this Item.
8. Press the Up-arrow or Down-arrow buttons repeatedly
until MediaType is highlighted.
9. Press the Enter button to select this Item.
10. Press the Up-arrow or Down-arrow buttons repeatedly to
move through the range of media types until Transparency is
highlighted.
11. Press the Enter button to select this value.
12. Check that an asterisk (*) appears beside Transparency.
13. Press the Online button to exit menu mode and return to the
ready to print status.
Drum
Cleaning
ON
OFF
Set to produce idling of a drum
before printing in order to
reduce horizontal white lines.
This shortens image drum life.
Hex Dump Execute Prints out the data received
from the host PC in
hexadecimal code.
Item Value Description
To Next Page
Loading...
Need help?
General
