18 – C910 Paper Recommendations
Tray 1 and Optional Trays 2 to 5
Tray 1 is the standard blank paper input tray and can hold up to
530 sheets of 20 lb (75 g/m²) paper. Additional trays can be
added as an option to give a total tray capacity of 2650 sheets of
20 lb (75 g/m²) paper.
If you have identical paper stock loaded in more than one tray (for
example Tray 1 and Tray 2 or the MP Tray), you can have the
printer automatically switch to that other tray when the current
tray runs out of paper. This function can be enabled by driver
settings when printing from a Windows application or by a menu
setting when printing from other applications.
MP (Multi-Purpose) Tray
The multi-purpose tray is used for media sizes additional to those
of the standard trays, heavier media weights and special media.
The multi-purpose tray can handle the same sizes as the standard
trays but in weights up to 73 lb (330 g/m²). For very heavy paper
stock use the face-up paper stacker. This ensures that the paper
path through the printer is almost straight.
The multi-purpose tray can feed paper widths as small as 3in
(76.2 mm) and lengths up to 47.2 in (1200 mm). For banner
printing, recommended sizes are Letter wide, 35.4 in and 47.24 in
long and weight 34 lb (128 g/m²).
Use the multi purpose tray for printing on envelopes and
transparencies. Up to 100 sheets of transparencies or 25
envelopes can be loaded at one time, subject to a maximum
stacking depth of 1 inch (25 mm).
Paper or transparencies should be loaded print side up and top
edge into the printer. Do not use the duplex (two-sided printing)
function for transparencies.
Transparencies
Glossy paper
A4, Letter 0.004 inch
0.102 mm
Tray 1 or
MP Tray
Face-up
Stacker
Type
Size
Weight
Input/
Output
To Next Page
Loading...
Need help?
General
