92 – C910 Appendix A – Display Panel Messages
Appendix A – Display Panel
Messages
The display panel messages are intended to be self-explanatory.
Representative messages are given as examples below.
Message Explanation
Ready to Print Your printer is online and ready to print.
Printing tttttt Your printer is printing and paper is currently being
fed from tttttt, where tttttt identifies a tray.
tttttt Near End The paper supply in the tray identified by tttttt will
run out soon.
cccccc Toner Low The remaining toner of color cccccc is running low.
Fuser Unit Near
Life
The fuser unit is nearing the end of its working life.
Change Fuser Unit The fuser unit has reached the end of its working life
and has to be replaced.
Inverter is
Removed
The optional Inverter unit has been separated from
the printer and all Finisher functions are disabled.
Invalid Data
Press ONLINE
Button
Invalid data has been received by the printer.
Press the ONLINE button to clear this warning.
Change Paper in
tttttt
mmmmmm
pppppp
Press ONLINE
button
Please see HELP
for details
There is a mismatch between the media in the tray
and print data.
Load media of size mmmmmm and type pppppp into
tray tttttt. The message may remain for some time
after you have closed the tray.
You can have the printer ignore this error for the
current print job by pressing the ONLINE button.
You can access help details by pressing the HELP
button.
Install Paper
tttttt
mmmmmm
Please see HELP
for details
The printer has tried to take paper from an empty
tray.
Load media of size mmmmmm into tray tttttt. The
message may remain for some time after you have
closed the tray.
You can access help details by pressing the HELP
button.
To Next Page
Loading...
Need help?
General
