81 – C910 Troubleshooting
10. Move the Finisher and Inverter back into position and
connect to the printer.
Avoiding Paper Jams
The following table summarizes possible causes of paper jams and
suggests ways of avoiding them.
Possible cause Suggested remedy
The printer is not level. Place the printer on a steady, level
surface.
Your print media is too light or
too heavy.
Use appropriate media.
Your print media is damp or
charged with static electricity.
Use media that has been stored in
appropriate temperature and humidity
conditions.
Your print media is creased or
curled.
Use appropriate media. Decurled
media can be used.
Your print media sheets are not
aligned with each other.
Remove the sheets, jog them into
alignment and reload them.
Your print media is not aligned
properly in the paper tray.
Adjust the paper stop and paper
guides of the tray, or the manual feed
guide on the MP Tray to align the
media properly.
To Next Page
Loading...
Need help?
General
