98 – C910 Appendix B – Menu system
Configuration example – Number lpf
Monochrome Pages Printed
To display the total monochrome pages printed so far
(remembering that a duplex page counts as two pages):
1. Make sure that the display panel indicates that the printer is
ready to print.
2. Enter ther menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly until the
Configuration menu is highlighted.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly
until Print Page Count is highlighted.
5. Press the Enter button to select this Item.
6. Press the Up-arrow or Down-arrow buttons repeatedly
until Monochrome Page is highlighted.
7. Press the Enter button and the monochrome page count is
displayed.
8. Press the Online button to exit menu mode and return to the
ready to print status.
Total
Memory
xx MB Displays total RAM memory installed in
the printer.
Same as Total Memory of Menu Map.
Flash
Memory
xx MB [Fxx] Displays total flash memory installed in
the printer and version.
Same as Flash Memory of Menu Map.
HDD xx.xx GB [Fxx] Displays size of hard disk and file
system version.
Same as HDD of Menu Map.
Item value Description
To Next Page
Loading...
Need help?
General
