MB290
- 41 -
Parameters/Setup
Printing the functions guide
!51 - PRINT / FUNCTIONS LIST
Press !, enter 51 using the keypad.
The printing of the functions guide starts.
Printing the logs
The incoming and outgoing logs list the last 30
transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30
transmissions. However, you may request a print out at
any time.
Each log (incoming or outgoing) contains a table with the
following information:
• date and time of the incoming or outgoing document,
• subscriber’s number or E-mail address,
• transmission mode (Normal, Fine, SFine or Photo),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted CORRECT if
properly transmitted,
or
information codes for special calls (polling, manual
subscribers, etc.)
• reason for call error (example: your subscriber does
not answer).
To print the logs:
!54 - PRINT / LOGS
Press !, enter 54 using the keypad.
The printing of the logs starts. The incoming and outgoing
logs are printed on the same page.
Print the list of setups
To print the list of setups:
!56 - PRINT / SETUP
Press !, enter 56 using the keypad.
The printing of the list of setups starts.
Font printing
You can print the list of fonts installed on your machine at
any time.
To print PCL fonts:
!59 - PRINT / PCL FONTS
To print SG Script fonts:
!50 - PRINT / SGScript FONTS
Lock the machine
This function prevents non-authorized people from
accessing the machine. An access code will be required
every time someone wants to use the device. After each
use, the device will lock automatically.
Before that you have to enter a lock code.
!811 - ADVANCED FCT / LOCK / LOCKING CODE
1 Press !, enter 811 using the keypad.
2 Enter your lock code (4 digits) with the keyboard,
confirm with OK.
3 Enter again your lock code (4 digits) with the
keyboard, confirm with OK.
4 Quit this menu by pressing the button.
Lock the keyboard
Every time you use your machine, you will have to enter
your code.
!812 - ADVANCED FCT / LOCK / LOCK KEYBD.
1 Press !, enter 812 using the keypad.
2 Enter the four-digit locking code with the keypad.
3 Press OK to confirm.
4 With the buttons ! or ", choose ON and confirm
with OK.
5 Quit this menu by pressing the button.
Important
The printing is not possible on A5
(or Statement) paper format.
Note
You can also access the PRINT menu
by pressing the button.
Important
The printing is not possible on A5
(or Statement) paper format.
Note
You can also access the PRINT menu
by pressing the button.
Important
The printing is not possible on A5
(or Statement) paper format.
Note
You can also access the PRINT menu
by pressing the button.
Important
The printing is not possible on A5
(or Statement) paper format.
Note
You can also access the PRINT menu
by pressing the button.
Important
If a code is already registered, enter
the old code before typing the new
one.
To Next Page
Loading...
Need help?
General
