MB290
- 67 -
PC Features
When asked for the drivers, insert the installation CD-
ROM. The drivers are detected automatically.
Installing PostScript print drivers
If you want to install Postscript print drivers for your
multifunction machine, proceed as follows:
1 Connect to the Adobe website (
http://
www.adobe.com/support/downloads/
product.jsp?product=44&platform=Windows
) and
download the adequate universal driver installer.
2 Launch the installation file on your computer and
follow the instructions on screen.
3 When asked for the PPD file, insert the Companion
Suite Pro installation CD-ROM. The PPD file is
located in the Drivers\PPD folder.
The PostScript printer is by default identified as OKI
MB290 (PS) if it is connected to the PC via USB, or as
OKI MB290 (PS) N
ETWORK if it is connected to an
Ethernet or a wireless network.
Multifunction Terminal's Supervision
The software that you have installed contains two
multifunction machine management applications,
C
OMPANION DIRECTOR and COMPANION MONITOR, which
allow you to:
• check whether the multifunction machine is connected
to your PC,
• monitor the multifunction machine activities,
• monitor the status of the multifunction machine
consumables from the PC,
• quickly access the graphic editor applications.
To manage the multifunction machine, run the
Companion Director application by clicking on the icon
located on your desktop or from the menu S
TART
>A
LLPROGRAMS > OKIDATA >COMPANION SUITE PRO
LL2 > C
OMPANION - DIRECTOR.
Checking the connection between the PC
and the multifunction machine
To check if the connection between the devices is good,
run the C
OMPANION MONITOR software from the icon
located on the desktop and check that the same
information is displayed on the multifunction machine.
Companion Director
This graphical Interface allows you to run the utilities and
the software to manage your multifunction machine.
Graphical presentation
Run the application by clicking on the COMPANION -
D
IRECTOR icon located on your desktop or from the menu
S
TART >ALLPROGRAMS > OKIDATA >COMPANION SUITE
P
RO LL2 > COMPANION - DIRECTOR.
Utilities and applications activation
The Companion Suite Pro graphical interface allows you
to run the following utilities and software:
•get H
ELP from the current documentation,
•run the P
APERPORT software (Doc Manager).
To run a software or utility contained in the Companion
Suite Pro kit, place the cursor on it and left-click with the
mouse.
Companion Monitor
Graphical presentation
Run the application by clicking on the COMPANION -
M
ONITOR icon located on your desktop or from the menu
S
TART >ALLPROGRAMS > OKIDATA >COMPANION SUITE
P
RO LL2 > COMPANION - MONITOR.
To Next Page
Loading...
Need help?
General
