MB290
- 43 -
Parameters/Setup
Printed pages counter
To view the number of pages printed on your machine:
!824 - ADVANCED FCT / COUNTERS / PRINTED PG
1 Press !, enter 824 using the keypad.
2 The number of printed pages appears on the
screen.
3 Quit this menu by pressing the button.
Display the consumables status
You can read at any time the remaining toner in the
cartridge. This level appears in percentage.
!86 - ADVANCED FCT / CONSUMABLES
1 Press !, enter 86 using the keypad.
2 The available toner percentage appears on the
screen.
3 Quit this menu by pressing the button.
Calibrate your scanner
You can do this operation when the quality of photocopied
documents is not satisfactory anymore.
!80 - ADVANCED FCT / CALIBRATION
1 Press !, enter 80 using the keypad. Confirm
with OK.
2 The scanner is triggered and a calibration is done
automatically.
3 At the end of the calibration, the machine comes
back to the screen saver
.
To Next Page
Loading...
Need help?
General
