To Next Page

To Previous Page

- 25 -

Initial Setup for Faxing

Faxing (For MB362, MB562, ES5462 MFP only)

●● Initial Setup for Faxing

This section explains the initial setup necessary for the Fax and Fax from Computer functions.

To set up the machine for the Fax and Fax from Computer functions, follow the 3 steps below:

● “Step 1 Setting Country Code” P.25

● “Step 2 Connecting a Telephone Line” P.26

● “Step 3 Conguring Basic Settings” P.30

Step 1 Setting Country Code

This section explains how to set the country

code. Be sure to select the suitable country code

before connecting the telephone line.

Note

● If you set wrong country code, you may not be able to

send or receive faxes. When you cannot send or receive

faxes even though you have properly connected the

telephone line, check if [Country Code] is set correctly.

1 Hold down the power switch for

approximately one second to turn on the

power.

2 Press the <SETTING> key on the

operator panel.

3 Press the to select [Admin Setup]

and then press

4 Enter the administrator password.

The factory default password is “aaaaaa”.

a Press , , , to select the

character you want, and then

press

- The selected character is entered as “*” in

the text led.

- If you have entered an incorrect value,

press the <CLEAR> key and then enter

the correct value.

b Repeat step a until all characters

required are entered.

c Press the and to select [Enter]

and press

Oki MC352 User Manual

Other manuals for Oki MC352