Oki MC352 User Manual

- 38 -
Faxing
3
Faxing (For MB362, MB562, ES5462 MFP only)
●● Faxing
This section explains the basic procedure for the Fax function.
The Fax function enables you to scan documents and transmit them as faxes or receive faxes via a
telephone line.
Be sure to nish the initial setup before using this function.
Procedure for Fax
This section explains how to transmit faxes. The
following procedure uses the direct input method
for specifying a destination.
You need to congure the initial settings before
using the Fax function.
Note
● Up to 40 digits can be entered for the destination fax
number.
Memo
● You can load only A4, letter, or legal size documents in
the ADF, and A4 or letter size documents on the document
glass.
● You cannot load mixed size documents for faxing.
● The following procedure uses the factory default settings.
1 Press the <FAX> key on the operator
panel.
2 Place your document in the ADF or on
the document glass as below:
● ADF
Load documents face up with the top edge of the
documents in rst.
Adjust the document guides to the width of your
documents.
● Document Glass
Place the document face down and align its top
edge to the upper-left corner of the glass.
Close the document glass cover gently.
Note
● Do not apply an excessive load to the document
glass.
Memo
● The machine prioritizes the ADF when scanning
documents. Be sure not to place documents on the
ADF when you use the document glass.
Note
● If Carriage Error <02> is displayed, press Power
OFF/ON.
3 Check that [Fax] is selected and
press
OK
to open the fax start screen.

Oki MC352 Specifications

General

Brand	Oki
Model	MC352
Category	All in One Printer
Language	English