Oki MC352 User Manual

- 61 -
Scanning to Network PC
4
Scanning
Step 2 Setting Up Your Computer and Machine for Scan to Network PC
To setup your computer and machine for Scan to Network PC, follow the 4 sub steps below:
● “Step 2-1 Checking the Name of the Computer” P.61
● “Step 2-2 Determining the Names of the Items Required for Scan to Network PC” P.62
● “Step 2-3 Conguring the Computer for Scan to Network PC” P.63
● “Step 2-4 Creating a Prole for Scan to Network PC” P.70
Check the values for each item in the Setup Information Form through the above steps.
 Setup Information Form
No. Item Outline Introduction Example
User Value
* You can look at the following pages
and make notes on the details you
have checked or the settings you
have congured.
C-1 Name of the
destination computer
The name of the computer to which
you are forwarding scanned data
PC1
C-2 User name to log
into the destination
computer
User name to log in to the computer
to which you are forwarding scanned
data
mc562 (Up to 32 characters)
C-3 Password to log
into the destination
computer
Password to log in to the computer
to which you are forwarding scanned
data
mc562 (Up to 32 characters)
C-4 Prole name to
register the settings
Name when registering a prole on
the machine
Sales (Up to 16 characters)
C-5 Shared folder name
on the destination
computer
Folder name of the computer to
which you are forwarding scanned
data
SalesDev (Up to 64 characters)
C-6 File name of the
scanned data
Scanned data le name ScanData (Up to 64 characters)
Note
● Before starting the setup, obtain permission from the network administrator to create a shared folder on the computer by
following the procedure below.
Memo
● The CIFS protocol is used in this procedure.
 Step 2-1 Checking the Name of
the Computer
Check the name of the computer following the
procedure below, and ll in C-1 of the Setup
Information Form.
 For Windows 7, Windows Server
2008 R2, Windows Server 2008 and
Windows Vista
1 Click [Start] and select [Control
Panel].
2 Select [System and Security].
For Windows Server 2008 and Windows Vista,
select [System and Maintenance].
3 Select [See the name of this
computer] under [System].
4 Enter the name in [Computer name] in
C-1 of the Setup Information Form.
C-1
5 Close the window.

Oki MC352 Specifications

General

Brand	Oki
Model	MC352
Category	All in One Printer
Language	English