Faxing - MC342dn, MC342dw, MC362dn, MC362w, MC562dn, MC562w, MC562dw, ES5462 MFP, ES5462dw MFP and MPS2731mc only
> 106
DRD
This mode allows the machine to detect a distinctive ring if it has been enabled on the
phone line. In this mode, the machine distinguishes the DRD type of the sender. The
machine then answers only when it matches the registered DRD type.
There are several type of DRD ring pattern. The length of ring ON time and ring OFF time
is different. It depends on the Country Code. Please set the Country Code and DRD Type
for your suitable DRD ring pattern. Refer to “Country Code” on page 171. You can register
up to four DRD types.
Country Code: except New Zealand, Australia and Hong Kong (This pattern is to apply to
America's DRD.)
Type 1: 2 sec ON - 4 sec OFF repeat
Type 2: 0.8 sec ON - 0.4 sec OFF - 0.8 sec ON - 4 sec OFF repeat
Type 3: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 0.2 sec OFF - 0.8 sec ON - 4 sec OFF repeat
Type 4: 0.3 sec ON - 0.2 sec OFF - 1 sec ON - 0.2 sec OFF - 0.3 sec ON - 4 sec OFF repeat
Country Code: New Zealand (This pattern is to apply to New Zealand's DRD.)
Type 1: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 2 sec OFF repeat
Type 2: 0.4 sec ON - 2.6 sec OFF repeat
Type 3:
0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 1.4 sec OFF repeat
Type 4: 0.4 sec ON - 0.8 sec OFF - 0.4 sec ON - 1.4 sec OFF repeat
Country Code: Australia (This pattern is to apply to Australia's DRD.)
Type 1: 0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 2 sec OFF repeat
Type 2:
0.2 sec ON - 0.4 sec OFF - 0.2 sec ON - 0.4 sec OFF - 0.2 sec ON - 1.6 sec OFF repeat
Country Code: Hong Kong (This pattern is to apply to Hong Kong's DRD.)
Type 1: 1.2 sec ON - 3 sec OFF repeat
Type 2:
0.4 sec ON - 0.2 sec OFF - 0.4 sec ON - 0.2 sec OFF - 0.8 sec ON - 0.4 sec OFF repeat
Type 3: 0.5 sec ON - 0.5 sec OFF - 1 sec ON - 0.5 sec OFF - 0.5 sec ON - 3 sec OFF repeat
Refer to “DRD Type” on page 189.
Printing received faxes
The machine automatically prints out the received fax.
Images larger than the specified paper are reduced, discarded, or printed onto multiple sheets
of paper depending on the reception print settings. Refer to “Rx Reduc. Rate” on page 171.
If the machine cannot print received faxes due to a lack of paper or a paper jam, it will
store the received fax data temporarily it’s memory. When the problem is resolved, it starts
printing automatically.
NOTE
> Use only standard or recycled paper.
> Available paper sizes are A4, letter, or legal.
NOTE
For details on how to load paper, refer to “Loading paper” on page 35.
For details on how to clear paper jams, refer to “Clearing paper jams” on page 142.
To check the reception history, refer to “Rx History” on page 96.
To Next Page
Loading...
Need help?
General
