Oki Microline 3320 User Manual

CUT-SHEET FEEDER
This moves the paper in very fine increments 1/180 inch on ML 3390/3391
or 1/144 inch on ML 3320/3321 to be exact - so you can position the top of
form precisely.
The location at which Fine Line Feed is completed will be stored in the
printers memory as the top of form . The location will be retained even
when the printer is turned off or unplugged until you reset it.
If no paper is inserted, pressing the SHIFT+ TOF button sets the top of
form position to 0.85 inch from the top of the page, the default setting for
the Cut-Sheet Feeder.
Page Margins
For best results
we recommend that you maintain minimum page margins
as shown in the diagram below . When you set up the page margins for
your word processing file, keep in mind that the CSF, automatically inserts
a 0.16 inch
left margin.
Applications which require reverse line
feed may not print well in the
bottom two inches of paper.
Wide Carriage Printer Owners!: When the CSF 3390-S or 33 90 -D is in st alled, be s ure that any
data you send to the printer is only eight inches wide (80 columns at 10 cpi). Otherwise, the
data will be printed on the platen.
ML3320id8.indd30ML3320id8.indd30 2015/05/0817:542015/05/0817:54
プロセスシアンプロセスシアンプロセスマゼンタプロセスマゼンタプロセスイエロープロセスイエロープロセスブラックプロセスブラック

Oki Microline 3320 Specifications

General

Brand	Oki
Model	Microline 3320
Category	Printer
Language	English