Oki ML3410 User Manual

Chapter 3
Operation
Operation
The Pacemark 3410 has a control panel that lets you select the character pitch
and print quality, control paper feeding, and customize your printer settings with the touch of a button.
You don't have to be a programmer or a computer expert to learn how to use it.
The control panel always shows the actual settings of the printer. If you change any of these features
through your computer, the panel lights will also change.
Some features will only function if you have the correct settings on your control panel. The panel will only
let you select valid combinations of features.
There are three sections to the control panel:
¨ Basic Control
¨ Print Quality
¨ Character Pitch
ML3410 ( 96-02-07 )

Oki ML3410 Specifications

Print Specifications

printhead	9 pin
print speed at 10 cpi	HSD 550 cps, Utility 417 cps, NLQ 104 cps
graphics resolution	1445216 dpi maximum

Paper Handling

paper weight	12 to 24 lb
paper thickness top feed	0.36 mm (0.014 inches) maximum
paper thickness bottom feed	0.50 mm (0.020 inches) maximum

Operating Environment

operating temperature	50 to 104 degrees F (10 to 40 degrees C)
storage temperature	14 to 122 degrees F (-10 to +50 degrees C)
humidity	20 to 80% RH

Electrical Requirements

voltage	120 volts, +5.5%/-15% 220/240 volts, ±10%
frequency	50/60 Hz, ±2 Hz
power idling	30 watts
power operating	75 watts

Weight and Dimensions

width	25-1/4 inches (540 mm)
depth	19 inches (483 mm)
height	15 inches (203 mm)
weight	63 lbs. (25.4 kg)