Oki ML3410 User Manual

Pacemark 2410 Emulation Commands
Pacemark 2410 Emulation Commands
Horizontal
Control
Carriage return CR 13 0D
Set horizontal
tabs
ESC 3 n n... n
NUL
27 51 n n ...n 0 1B 33 n n ...n 00 Sets tabs n
characterspaces
from left
margin(pitch
when set).
Clears previously
set tabs.Default
is every 8spaces.
k = 0 to 10 (# of
tabsn = 0 to 255
Horizontal tabs HT 9 09 Skip to next
horizontaltab
position.
Vertical Control
Set 6 lpi line feed ESC 4 27 52 1B 34 Also cancels
verticaltabs.
Set 8 lpi line feed ESC 5 27 53 1B 35 Also cancels
verticaltabs.
Set line feed ESC % 9 n 27 37 57 1B 25 39 n n = 0 to 127
Line feed LF 10 0A
Form feed FF 12 0C Prints data in
bufferand
advances paper
tonext top of
form
Set vertical tabs ESC 1 n n... n
NUL
27 49 n n ...n 0 1B 31 n n ...n 00 n = 0 to 127 (line
# oftab0 clears
tabs)k = 0 to 10
(total #
oftabs)Change in
line pitchdoesn't
change
positionof tabs.
Vertical tab VT 11 0B Prints line and
skips tonext
vertical tab.
ML3410 ( 96-02-07 )

Oki ML3410 Specifications

Print Specifications

printhead	9 pin
print speed at 10 cpi	HSD 550 cps, Utility 417 cps, NLQ 104 cps
graphics resolution	1445216 dpi maximum

Paper Handling

paper weight	12 to 24 lb
paper thickness top feed	0.36 mm (0.014 inches) maximum
paper thickness bottom feed	0.50 mm (0.020 inches) maximum

Operating Environment

operating temperature	50 to 104 degrees F (10 to 40 degrees C)
storage temperature	14 to 122 degrees F (-10 to +50 degrees C)
humidity	20 to 80% RH

Electrical Requirements

voltage	120 volts, +5.5%/-15% 220/240 volts, ±10%
frequency	50/60 Hz, ±2 Hz
power idling	30 watts
power operating	75 watts

Weight and Dimensions

width	25-1/4 inches (540 mm)
depth	19 inches (483 mm)
height	15 inches (203 mm)
weight	63 lbs. (25.4 kg)