EasyManuals Logo
Home>Oki>Printer>ML3410

Oki ML3410 User Manual

Oki ML3410
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Print Mode
Print Mode
When you turn your printer on, it is in Print mode. Print mode is the state of
normal operation.
In Print mode, the functions above the basic control buttons are active.
1.
SELECT button:
Press this button to deselect the printer (SELECT light goes out). Press it a
second time to enable the printer to receive data again (SELECT light goes on).
2.
LINE FEED button:
Press this button to advance the paper one line at a time.
3.
FORM FEED button:
Press this button to advance the paper one page at a time.
4.
TEAR button:
Press this button to advance the paper from the printing position to the tearoff
position. This allows you to tear off a printed page without wasting an extra sheet of paper. See
page 16 for details (
).
5.
PARK button:
Press this button to retract continuous forms paper out of the paper path. This
lets you use single sheet paper without removing the continuous forms. See 18 for details (
).
6.
TOP OF FORM button:
When the printer is deselected, pressing this button sets the top of form
the point on the page at which printing starts. When you press the FORM FEED button, the new
page advances to this line.
7.
MICRO FEED buttons:
Pressing these buttons feeds paper up or down in fine increments. If you
hold down the TOP OF FORM button while using the MICRO FEED buttons, the top of form will
automatically be set when you release the buttons.
ML3410 ( 96-02-07 )

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki ML3410 and is the answer not in the manual?

Oki ML3410 Specifications

Print Specifications IconPrint Specifications
printhead9 pin
print speed at 10 cpiHSD 550 cps, Utility 417 cps, NLQ 104 cps
graphics resolution1445216 dpi maximum
Paper Handling IconPaper Handling
paper weight12 to 24 lb
paper thickness top feed0.36 mm (0.014 inches) maximum
paper thickness bottom feed0.50 mm (0.020 inches) maximum
Operating Environment IconOperating Environment
operating temperature50 to 104 degrees F (10 to 40 degrees C)
storage temperature14 to 122 degrees F (-10 to +50 degrees C)
humidity20 to 80% RH
Electrical Requirements IconElectrical Requirements
voltage120 volts, +5.5%/-15% 220/240 volts, ±10%
frequency50/60 Hz, ±2 Hz
power idling30 watts
power operating75 watts
Weight and Dimensions IconWeight and Dimensions
width25-1/4 inches (540 mm)
depth19 inches (483 mm)
height15 inches (203 mm)
weight63 lbs. (25.4 kg)

Related product manuals