The seat and mirror positions will be stored for the
number pressed. Repeat the procedure to store another
position with the other number if desired.
To
adjust the
seat and mirrors to the stored position, press the number
corresponding to the position. The memory function will
only work with the gearshift in PARK (P).
To stop the automatic movement, move the seat switch
in any direction. For easier exiting, press the
1
and
2
buttons at the same time to move the seat completely
down and back.
Remote
Lock
Control Personalization
Feature
Each Remote Lock Control transmitter can be
programmed to move the driver’s seat and outside
mirrors to a set memory position when
the
transmitter’s
UNLOCK
button is pressed. For programming
instructions, see “Personalization Features’’ in the Index.
Heated Front Seat (Option)
This feature will quickly heat the lower cushions and
lower back
of
the driver and front passenger seats for
added comfort.
Press the button once
to
turn the heater on high. The
HI
indicator light below the button will glow. Press it again
to turn the heater
on
low. The
LO
indicator light below
the button will glow. Press
it
a third time
to
turn the
heater
off.
The heater will turn
off
automatically when
the ignition is turned off.
1-4
To Next Page
Loading...
Need help?
General
