Headlamp
High/Low
Beam
To
change the headlamps
from low beam to high or
high to low, pull the turn
signal lever all the way
toward you. Then release
it.
When the high beams are on, a light
on
the instrument
panel also will be on.
Flash-To-Pass
This feature lets you use your high-beam headlamps
to
signal
a
driver
in
front
of
you
that you want to pass. It
works even if your headlamps are off.
To
use it, pull
the
turn signal lever toward you.
If your headlamps are
off,
your high-beam headlamps
will turn
on.
They’ll stay on as long as you hold the
lever there. Release the lever to turn them
off.
If your headlamps are on, but
on
low beam, the system
works normally.
Just
pull the lever until
it
clicks.
Your
headlamps will shift to high beam and stay there.
To
return to low beam, just pull the lever toward you.
If
your headlamps are
on,
and on high beam, your
headlamps will switch to low beam.
To
get back to high
beam,
pull
the lever toward
you.
2-38
To Next Page
Loading...
Need help?
General
