Operating the RECIRC mode in cold temperatures or
under high humidity conditions may cause moisture
to
form on the inside of the windshield. If this condition
occurs, deselect the RECIRC button.
A/C
ON:
Press this button to turn the air conditioning
on and
off.
If the system is operating in the automatic
mode, the A/C
ON
indicator light will automatically
illuminate. In the auto mode, the A/C compressor will
only operate when the system determines
it
is needed.
OFF:
Rotate the AUTO-PUSH knob to OFF. Turning
the system off will cause the fan to turn off and the
airflow to be directed
out
the lower floor outlets. The
system will still try to keep the interior of the vehicle at
the previously chosen comfort setting. The outside
temperature will show in the display when the system is
set to
OFF.
Air Conditioning
The air conditioner cools, dehumidifies and filters the
air for the inside of the vehicle.
The air conditioning compressor is enabled in all modes
unless the A/C
ON
button
is
in the off position
(indicator light will not be illuminated). However, the
air conditioning compressor will not operate when the
outside temperature is below
44°F
(7°C). When the air
conditioner is on,
you
may sometimes notice slight
changes in your vehicle's engine speed and power. This
is normal, because the system is designed
to
cycle the
compressor on and off to keep the desired cooling and
help
fuel
economy.
On very
hot
days, open the windows
long
enough to let
the hot air out. This reduces the time required to cool the
interior
of
the
vehicle to a comfortable level. If the
system
is
in the automatic mode (AUTO-PUSH knob
indicator light is
on),
during very hot days the system
will automatically
go
to the RECIRC mode and the
temperature door will be positioned
at
the full cold
position for maximum cooling. You can choose
the
extreme comfort setting of 60°F (16"C), but the
system
will
not cool any faster by choosing the extreme
comfort setting.
To Next Page
Loading...
Need help?
General
