26
5-2 Transmitted simple polarization observation method
(Operation portion) (Page)
4 Revolving nosepiece 14
9 Aperture diaphragm lever 20
Place the specimen on the stage.
Engage the 10X objective in the light path.
Bring the specimen into focus and adjust the brightness.
Set the main switch to (ON).
Adjust the crossed Nicol.
Observation
7 Binocular portion 16
8 Diopter adjustment ring 17
b Polarizer for simple polarization 41
For polarization observation, the objective for polarization, simple polarizing intermediate attachment, analyzer for simple
polarization and polarizer are necessary.
(For attaching procedures, see "11Assembly" on page 37.)
Select BF (brightfield observation).
4 Revolving nosepiece 14
Engage the objective for polarization you use in the light path.
a Coarse/fine focusing knobs 14
Bring the specimen into focus and adjust the brightness.
c
Simple polarizing intermediate attachment
28
Engage the analyzer for simple polarization in the light path.
Place the polarizer.
Adjust the brightness.
d Analyzer for simple polarization 28
c
Simple polarizing intermediate attachment
b
Polarizer for simple polarization
2 Condenser turret 19
1 Main switch 9
5 Specimen holder 10
3 X-axis/Y-axis knobs 11
6 Brightness adjustment knob 9
Adjust the interpupillary
distance.
Adjust the diopter.
6 Brightness adjustment knob 9
6 Brightness adjustment knob 9
Adjust the aperture diaphragm.
To Next Page
Loading...
Need help?
General
