Chapter 3 Cleaning, Disinfection and Sterilization Procedures
19
EVIS EXERA GIF/CF/PCF TYPE 160 Series REPROCESSING MANUAL
Channel cleaning brush (BW-17K, BW-20T)
The channel cleaning brush is used to brush the inside of the instrument/suction
channels and the holes in the air/water and suction valves (see Figure 3.8).
Figure 3.8
Channel-opening cleaning brush (MH-507)
The channel-opening cleaning brush is used to brush the external surface of the
distal end of the endoscope, the suction cylinder and the instrument channel port
(see Figure 3.9).
Figure 3.9
To Next Page
Loading...
Need help?
General
