71
EN
Information
8
8
Information
Cleaning and storing the camera
Camera care
Exterior:
• Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water
and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you
have used the camera at the beach, use a cloth soaked in clean water and well wrung.
Monitor:
• Wipe gently with a soft cloth.
Lens:
• Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner.
# Cautions
• Do not use strong solvents such as benzene or alcohol, or a chemically treated cloth.
• Mold may form on the lens surface if the lens is left dirty.
Battery/USB-AC adapter:
• Wipe gently with a soft, dry cloth.
Storage
• When storing the camera for extended periods, remove the battery, USB-AC adapter and
card, and keep in a cool, dry place that is well ventilated.
• Periodically insert the battery and test the camera functions.
# Cautions
• Avoid leaving the camera in places where chemical products are handled since this may
result in corrosion.
Pixel mapping - Checking the image processing functions
The pixel mapping feature allows the camera to check and adjust the image pickup device
and image processing functions. After using the monitor or taking continuous shots, wait
for at least one minute before using the pixel mapping function to ensure that it operates
correctly.
1
Select [Pixel Mapping] in c Custom Menu (P. 50) tab b.
2
Press I, then press Q.
• The [Busy] bar is displayed when pixel mapping is in progress. When pixel mapping
is finished, the menu is restored.
# Cautions
• If you accidentally turn the camera off during pixel mapping, start again from Step 1.
To Next Page
Loading...
Need help?
General
