3.6 INAPPROPRIATE AND INCORRECT USE
Any use different from that stated in this manual, not included in, or not deducible from it, must be
considered INAPPROPRIATE and FORBIDDEN, because potentially dangerous for the safety of
the operators, and it causes the contractual warranty to be invalidated.
It is therefore forbidden to:
- wr
ap loads with size or features different from those adequate to the table dimensions;
- use the machine for purposes that differ from the instructions on the correct use;
- use improper or incompatible materials, or auxiliary equipment;
- autonomously change or replace parts of the machine;
- change the speed of the machine components;
- change the machine cycle;
- install non-original parts;
- allow staff not adequately trained to use the machine;
- fail to follow safety instructions;
- fail to follow instructions for installation, use, maintenance and repair;
- fail to follow the safety rules of the workplace or the relative laws and regulations in force.
DO N
OT USE THE MACHINE IN ENVIRONMENTS WITH AN AGGRESSIVE ATMOSPHERE;
DO N
OT USE THE MACHINE IN ENVIRONMENTS WITH AN EXPLOSIVE ATMOSPHERE.
3.7 OTHER RISKS
Despite all safety devices, the machine involves other risks related to the table rotation and to
indispensable carriage movements. Therefore, operators need to:
- pay at
tention to the warning messages;
- maintain an adequate safety distance from the dangerous parts
- rem
ain at a distance greater than 50 cm from the rotary table while the machine is in operation.
CEC BASE IGM REV13 30
To Next Page
Loading...
Need help?
General
