CHAPTER 1
GENERAL INFORMATION
1.1 AIM OF THE MANUAL
This manual is an integral part of the machine and was drawn up by the building company in its
own language (Italian) to provide all the necessary information for a correct and safe use
throughout its lifecycle (from transport, delivery, installation, use and maintenance to disposal). The
manual is divided into sections, chapters and paragraphs, so that the information structure
complies with the EU Machinery Directive and with the specific harmonized standards.
Before carrying out any operation on the machine, the operators and skilled technicians must read
carefully the instructions included in this manual and must follow them carefully. In case of doubts
on the interpretation of the instructions, please turn to the Builder for the necessary explanations.
The only way to ensure a correct functioning in the long run and to prevent dangerous situations
for people and objects from taking place is to follow these instructions carefully.
Please carefully read this manual before installing and starting the machine.
1.2 CONSERVING THE MANUAL
The instruction manual should be kept near the machine throughout its lifecycle, should be kept far
from any agent that might deteriorate it and should be available for all the operators and skilled
technicians that might need it. The manual should be sent with the machine if the machine is sent
to a new user or owner.
1.3 BUILDER
Wide experience and radical innovation have made the building of this cutting-edge, cost-effective
wrapping machine possible.
If you need information on use and maintenance, or if you wish to request spare parts, please
give the identification data of the machine placed on the Builder plate.
CEC BASE IGM REV13 7
To Next Page
Loading...
Need help?
General
