- Adj
ustment operations under reduced safety conditions must be carried out by a single
operator; during their performance access to the machine by unauthorised staff must be
prevented.
- All procedures performed on the plant or on the electrical equipment must be carried out
exclusively by a specialised electrician.
- The operating clearance around the machine must be free of obstacles, clean and well lighted.
To
guarantee the best working of the machine in time, please carry out the following operations:
- ordinary maintenance of mechanical parts (power must be off);
- ordinary maintenance of electrical parts (power must be off);
- extraordinary maintenance (power must be off);
- cleaning operations.
5.2 MECHANICAL PARTS MAINTENANCE
Mai
ntenance of mechanical parts must be only carried out by adequately trained operators
(mechanical maintainers), while the machine is cut off from the power supply.
Dur
ing maintenance operations you have to remove some of the fixed guards. Avoid losing
fixing elements of the fixed guards.
Ti
ghten all screws, bolts and lock nuts of every adjustable mechanical element following
normal tightening values, without using any levers or hitting any spanners.
5.2.1 GREASING
GREASING OF THE TABLE ROTATION
CHAIN
CEC BASE IGM REV13 40
To Next Page
Loading...
Need help?
General
