About
every month or every 200 working hours, check that the photocell reading the pallet height is
centered and that any support brackets are tightened.
5.4 EXTRAORDINARY MAINTENANCE
Any
maintenance operation different from those described in the previous paragraphs must be
considered EXTRAORDINARY MAINTENANCE. Contact with the Builder before carrying out any
kind of operation on the machine.
All extraordinary maintenance operations must be carried out by skilled staff, and only after explicit
authorisation is obtained from the Builder.
Inappr
opriate operations of extraordinary maintenance by staff that was not adequately
trained and informed can cause dangerous situations, damage and malfunction.
5.5 CLEANING
- Maintain the machine accurately clean, especially in the parts that are in contact with the
product and the packaging materials.
- All cleaning operations must be carried out with the machine turned off and disconnected from
the power supply.
- Do not allow to unauthorized staff to access the machine
- Do not pu
t your body, fingers or limbs into the machine openings when the machine is running.
ļ Do not
clean the machine with aggressive products, even if diluted.
CEC BASE IGM REV13 43
To Next Page
Loading...
Need help?
General
