Omni Base User Manual

CHAPTER 6
DEMOLITION AND DISPOSAL
6.1 DISPOSAL OF PRODUCTION WASTE
If waste material (e.g. waste of plastic film) is generated during processing, it will have to be
collected, recycled or disposed of in compliance with the laws in force in the country where the
machine is installed.
6.2 MACHINE DEMOLITION
When dismantling the machine, plastic parts and electrical components must be separated and
sent to centers for separate waste collection, according to the laws in force. Metal parts must be
divided according to the type of metal for a correct recycling.
To s
afeguard the health of people and the safety of objects, demolition operations must be carried
out by trained staff with adequate equipment.
CEC BASE IGM REV13 45

Omni Base Specifications

General

Brand	Omni
Model	Base
Category	Stretch Wrapping Systems
Language	English